Viewed products
Molybdenum is frequently used for...
HTMO1086
New product
Molybdenum is frequently used for making steel alloys, high strength alloys, and super-alloys. Molybdenum compounds usually have a low solubility in water. Industrially, they are used in high-pressure and high-temperature applications such as pigments and catalysts.
Heeger Materials (HM) provides customized Molybdenum Metal Powder (Mo Metal Powder) with the shortest lead time and the best price.
Availability date: 03/01/2013
Inquiry
Please contact us if you need customized services. We will contact you with the price and availability in 24 hours.
Materials | Molybdenum |
Purity | 99.95% |
Standard | N/A |
Dimensions | Customized |
Molybdenum (Mo) Metal Powder
CAS Number | 7439-98-7 |
Formula Weight | 95.95 |
Melting Point | 2622°C, 4752°F, 2895 K |
Spec. Gravity | 10.2 gm/cm3 |
HM offers a wide variety of molybdenum powder in the size and purity to match any customer's requirements. Standard screens sizes of -5 to -325 mesh are available, with finer sizes down to -635 mesh available on lab scale quantities. Split screen fractions such as -100+325 mesh are available. The oxygen content can be offered at lower levels through special reduction conditions as well as special packaging to protect the powder.
· FMo-1 is used as raw material for processing the large size molybdenum plate, electrical heating element made of molybdenum silicide;
· FMo-2 is used as raw material for processing molybdenum wafer , Molybdenum Piercing Mandrels
Related Product
l Spherical molybdenum powder - Used for the spraying industry and near net molding for Highly precise component.
l Plasma spherical molybdenum powder - The lower impurity , Higher Bulk density ,Higher Tap density ,Narrow Particle size distribution, good flowability . It's essential and irreplaceable material for spraying ,near net molding ,injection molding etc.
l TZM powder - TZM Molybdenum Alloy Powder
Specifications of Molybdenum (Mo) Powder
Type | FMo-1 | FMo-2 | |
Mo Content(%)≥ | 99.90 | 99.50 | |
Other Elements(%)< | Pb | 0.0005 | 0.0005 |
Bi | 0.0005 | 0.0005 | |
Sn | 0.0005 | 0.0005 | |
Sb | 0.0010 | 0.0010 | |
Cd | 0.0010 | 0.0010 | |
Fe | 0.0050 | 0.020 | |
Al | 0.0015 | 0.0050 | |
Si | 0.0020 | 0.0050 | |
Mg | 0.0020 | 0.0040 | |
Ni | 0.0030 | 0.0050 | |
Cu | 0.0010 | 0.0010 | |
Ca | 0.0015 | 0.0030 | |
P | 0.0010 | 0.0030 | |
C | 0.0050 | 0.010 | |
N | 0.015 | 0.020 | |
O | 0.150 | 0.250 | |
“ Mo” is the part remaining after subtracting these elements exclude gas element from 100. |
Physical properties:
F.S.S.S: 2.5mm~6.0mm; Bulk density: 0.85g/cm3~1.5g/cm3
HM offers broad selections of bulk density, particle size range and purity. Feed free to contact us!
TYPICAL TRACE ELEMENT CHEMICAL ANALYSIS
METALLIC IMPURITIES (WT%) | |||||
Element | Max | Typical | Element | Max | Typical |
Al | 0.003 | <0.001 | Mo | 0.010 | 0.002 |
Co | 0.002 | <0.001 | Na | 0.003 | <0.001 |
Cr | 0.005 | 0.001 | Ni | 0.005 | 0.002 |
Cu | 0.002 | <0.001 | Si | 0.001 | <0.001 |
Fe | 0.005 | 0.001 | Sn | 0.001 | <0.001 |
MOLYBDENUM (WT%) > 99.9% Excluding Gases |
ANALYTICAL REPORTS
A Certificate of Analysis (COA) accompanies each shipment of Molybdenum carbide powder. HM’s own Powder Metallurgy QC Laboratory prepares each COA to include the following:
l Average Particle Size (Fisher Sub-Sieve ASTM B-330)
l Apparent Density (Scott Volumeter ASTM B-329) ]
l Particle Size Distribution (Photelometer ASTM B-430, Sedigraph, or Malvern Mastersizer)
l Chemical Impurity Analysis
Packaging of HM Molybdenum (Mo) Powder:
Available in 500 lb/250 kg drums or 50-100 lb/25-50 kg pails
Heeger Materials respects your privacy, and we will NOT sell or provide your personal data to other third parties, or allow them to use your personal data for their own purposes. However, we would like to send you information from time to time by mail or email about our products and special offers in addition to the interest categories you've selected above. Read our Privacy Policy
No customer reviews for the moment.
* required fields